Driveways & Patios
Floors & Foundations
Floors & Flatwork
Sites & Facilities
Floors & Coatings
Facilities We Serve
Brands · Sika
Sika Waterproofing & Crack Injection in Boston
When concrete needs to stay dry or a crack needs to seal tight, Sika is the chemistry we reach for. We install the full Sika system, primer, mid-coat, topcoat, in the sequence and temperature the spec requires, so the warranty holds and the repair lasts. Every job gets a free written estimate.
- Full Sika system installed
- Waterproofing and injection expert
- Free written estimate, firm schedule
Below-grade protection
Where Sika Waterproofing Stops Water in Boston
Concrete moves. Temperature swings, freeze-thaw cycles, and ground settlement all shift the slab and walls. A rigid waterproofing coating cracks when the substrate moves, and water finds the gap. Sika waterproofing membranes (Sikalastic, Sikagard) are elastomeric, meaning they flex with the concrete instead of breaking apart.
We apply Sika waterproofing systems to foundation walls, basement slabs, and wet rooms. The elastomeric chemistry bonds to the concrete and moves with it, keeping water out through the Boston freeze-thaw cycle. Basement waterproofing with Sika is where this flexibility pays back most, because the pressure is constant and the stakes are high.
When a crack is already there and leaking, Sika crack injection (SikaFix HH polyurethane) fills it from inside without excavation. For spalled or damaged concrete, Sika MonoTop repair mortars rebuild the profile, and SikaTop floor systems finish the surface.
Installation sequence
How Sika Systems Get Installed Right
-
Assess the concrete and pick the line
We evaluate the substrate condition, moisture level, and whether the job is waterproofing, injection, repair, or flooring. The right Sika product line depends on all three.
-
Prepare the surface to spec
Concrete is cleaned, routed, and dried to the moisture content Sika requires. Cracks are opened and prepped for injection if that is the repair path.
-
Apply primer, body, topcoat in sequence
Each layer goes down at the temperature and thickness the Sika spec calls for, with the right cure time between coats. This is what keeps the warranty valid.
-
Document and hand over data
The install is photographed, the product data sheets are provided, and you have the record for any future work or warranty claim.
Injection and repair
Sika Crack Injection & Repair Mortars
An active leak through a foundation wall or basement slab does not always need excavation. Sika crack injection with SikaFix HH polyurethane fills the crack from inside, sealing it and stabilizing the substrate at the same time. The polyurethane expands slightly as it cures, filling voids and micro-cracks the eye cannot see.
For concrete that is spalled, scaled, or structurally compromised, Sika MonoTop repair mortars rebuild the concrete to the original profile and strength. We choose the chemistry based on whether the repair is cosmetic or load-bearing. Foundation repair and basement crack repair both benefit from this targeted approach. The result is a repair that performs like the original concrete, not a patch that fails again next season.
Sika product lines
All Sika Products We Specify and Install
Waterproofing, crack injection, repair mortars and floor systems, installed to the full Sika specification.
Sika Waterproofing Systems
Sikalastic and Sikagard elastomeric membranes for foundations and wet rooms.
Learn moreSika Crack Injection
SikaFix HH polyurethane and SikaFlex injection to seal active cracks from inside.
Learn moreSika Repair & Restoration
MonoTop repair mortars that rebuild spalled and structural concrete to original profile.
Learn moreSikaTop & Floor Systems
SikaTop topcoat and floor system products for finished concrete surfaces.
Learn moreCommon questions
Sika Questions Answered
Waterproofing, injection, repair and warranty in Boston.
Sika crack injection stopped a leak we had chased with caulking for years. They sealed it from inside and the basement has been dry through two springs.
Full Sika waterproofing on a new foundation. Elastomeric so it can flex with the concrete and not crack off the way the old rigid coating did.
SikaTop repair on a worn loading-dock area. Profile is exact, took our forklift traffic, and they handed over the data sheets for our records.
They install Sika as a full system, not just a coat of the product they have on the truck. That difference shows up in how long the install holds.
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Boston.
Ready to start
Get a Free Sika Estimate in Boston
A leaking foundation, an active crack, spalled concrete or a floor that needs finishing, tell us what you are dealing with and we will spec the right Sika system and send a written quote.
We'll spec the Sika system and send a written quote within one business day.