Sealed Garage Floors in Boston That Last Through Winter
Your garage slab endures freeze-thaw cycles, salt spray, tire marks and spilled fluids every season. A properly prepped epoxy, polyaspartic or metallic coating seals the concrete and makes cleanup effortless. We grind the slab first, then apply the full system to spec. Free written estimate, firm timeline.
Surface Prep Determines If Your Garage Floor Coating Holds
A coating is only as good as the concrete underneath it. When a slab is sealed, dusty or has old sealer still clinging to it, any coating applied on top will peel and flake within months, usually starting where the tires sit.
We begin every job by grinding or shot-blasting the slab to expose fresh concrete, then inspect for cracks, pits and moisture. Any damage gets repaired before the coating system goes down. This is the step most contractors skip, and it is why most coatings fail.
Once the slab is profiled and sound, we apply the full system to manufacturer specs. Epoxy coatings offer proven durability at a fair price. Polyaspartic systems cure in a day and resist UV fading. Metallic epoxy delivers a showroom look. We also offer stained concrete floors for a different aesthetic.
Recent work
The sequence
How We Install a Garage Floor Coating in Boston
Inspect the slab for moisture and damage
We test for moisture, identify cracks and pits, and determine which coating system fits your use and timeline.
Grind or shot-blast the concrete
We mechanically open the slab to a clean profile, removing old sealer, dust and any contaminants that would prevent bonding.
Repair cracks and pits in the concrete
We fill and level any damage so the coating adheres to a uniform, sound surface throughout the garage.
Apply primer, body coat and topcoat
We coat the full system to spec, including flake or metallic effects if chosen, then allow proper cure time before you use the garage.
System selection
Choose the Garage Floor Coating That Fits Your Needs
The right coating depends on how you use the space and how quickly you need it back in service. Epoxy is the most popular choice, offering excellent durability and a flake-finished look at a reasonable cost. Polyaspartic costs more but cures in roughly a day, so you can park on it the next morning.
For a premium appearance, metallic epoxy creates a marbled, high-end finish that still handles dropped tools and tire marks. If you prefer no coating at all, a polished concrete garage floor is ground and sealed for a sleek, low-maintenance surface. When an old coating has failed, garage floor repair strips it completely and rebuilds the system correctly.
Coating systems, prep, cost and durability for a Boston garage floor.
Coatings peel when they are applied over an unprepared slab. We mechanically grind or shot-blast every floor to a clean profile and check for moisture first, so the coating bonds to sound concrete instead of dust or old sealer.
Epoxy is the proven, cost-effective workhorse. Polyaspartic costs more but cures in about a day and holds its colour under UV. We match the system to how the garage is used and your timeline.
Yes, when it is the right system on a properly prepped slab. Epoxy, metallic and polyaspartic coatings are built to resist de-icing salt, moisture and hot-tire pickup, which is exactly what a Boston garage throws at a floor.
Coatings generally run $4 to $9 per square foot depending on the system, the slab condition and how much repair the concrete needs first. We confirm it with a written, itemised quote after seeing the floor.
Yes. Garage floor repair strips the failed coating, re-profiles the slab, repairs the concrete and rebuilds the system properly so the new finish actually bonds and lasts.
Homeowner reviews
What Boston Homeowners Say About Their Garage Floors
Tell us how you use the garage and we will recommend the right coating system, prep the slab properly, and put the whole job in a written, itemised quote.
