Metallic epoxy brings a three-dimensional, marbled finish to your garage slab. Pigment swirls through the body coat during installation, creating a unique pattern that shifts with the light. Boston Concrete applies the system with precision prep, primer, the metallic body, and a protective topcoat that resists hot tires, salt, and impact. Free written estimate included.
How Metallic Epoxy Differs from Standard Garage Coatings
Standard garage floor coatings come in solid colours or with broadcast flakes mixed in. Metallic epoxy takes a different approach: the pigment is suspended in a clear body coat and moved by hand during application, creating swirls, clouds, and visual depth that read as three-dimensional.
Each metallic floor is one-of-a-kind. The installer's technique, the pigment blend selected, ambient temperature, and humidity all influence the final pattern. The result is a premium-looking surface that costs less than tile or stone yet withstands daily garage wear.
The system itself is engineered for durability. After mechanical slab prep and primer, the metallic body coat is applied and worked. Then a tough clear topcoat seals the look and provides the wear layer. Explore polyaspartic coatings for faster cure times, or polished concrete if you prefer no coating at all.
Recent work
Installation sequence
The Steps to Install Metallic Epoxy in Your Boston Garage
Select your metallic pigment blend
We bring colour samples to your garage in natural light. You choose a single metallic tone or a multi-colour blend, and we test it on a small area so you see the effect before full installation.
Prepare the concrete slab
The slab is ground to the correct profile, cleaned, repaired where needed, moisture-tested, and primed with the system-matched primer that bonds the metallic coat.
Apply and work the metallic body coat
The clear body coat mixed with metallic pigment is rolled, brushed, and worked across the floor to move the pigment and create the marbled, three-dimensional effect.
Seal with the protective topcoat
Once the metallic body cures, a clear topcoat is applied to lock in the look and protect against tires, salt, spills, and impact. The floor then cures for full traffic and load.
Metallic vs. the alternatives
Comparing Metallic Epoxy to Other Garage Floor Options
Standard epoxy with broadcast flake is the budget-friendly choice; metallic epoxy is the premium aesthetic. Both are professionally installed coatings with the same prep rigor. The metallic body coat is what creates the showroom-quality finish.
Polyaspartic can also be applied as a metallic system with a faster cure window. Polished concrete takes the opposite path, no coating at all, just the slab densified and polished to a low sheen. If a previous coating has failed, garage floor repair strips and rebuilds the system correctly.
Look, durability, colour blends and how metallic compares to standard epoxy in Boston.
Metallic epoxy is variable by nature, the look depends on installer technique, pigment blend and conditions on the day. The sample shows the colour and style; the final floor will be in that family but uniquely yours.
Yes, because the topcoat over the metallic body is the same tough garage-grade topcoat used on standard epoxy. The metallic body coat sits below the topcoat, so impact, hot tires and salt hit the topcoat first.
Metallic carries a premium over standard epoxy because of the pigment, the body-coat technique and the installer time. We quote both side by side so you can compare for your garage.
Most colours and many multi-colour blends are available, blues and greens, warm earth tones, monochrome whites and greys, and combinations. We bring sample boards and recommend blends that suit garage use and read well across a large floor.
Not when finished for the use. The topcoat can include slip-resistant aggregate broadcast into the surface, giving traction even when the floor is wet or splashed.
Homeowner reviews
What Boston Homeowners Say About Their Metallic Epoxy Floors
Metallic epoxy in a deep blue blend across the shop garage. The depth catches the lights and looks like a showroom, but it handles dropped wrenches and brake fluid just fine.
T. R.
Boston
★★★★★
They did a small test area first so we could see how the metallic moved before committing. Final floor is exactly the look we picked, just at full scale.
J. N.
Brookline
★★★★★
Marbled monochrome whites and greys. Looks like polished marble until you realise it is concrete. The topcoat has shrugged off a winter of salt without losing the gloss.
E. N.
Quincy
★★★★★
Bought a sports car after the floor went in and the garage finally felt worthy of it. Compliments every time someone visits.
B. M.
Somerville
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Boston.
Have a colour in mind or still exploring options, tell us about your garage and we will bring metallic samples to a free site visit and prepare a written, itemised quote.
