Precision Battery & Semiconductor Facility Concrete in Boston
Battery cells and semiconductor wafers live or die on the floor beneath them. Static discharge, particulate contamination, or a slab out of tolerance will wreck your yield. Boston Concrete pours and finishes controlled-environment concrete for battery manufacturing and tech facilities, with the grounding, flatness and chemical resistance your process demands. Call for a free written estimate.
A battery cell or semiconductor wafer is sensitive to its environment. The concrete slab is not just a surface to stand on, it is part of the controlled environment. A static event from an ungrounded floor can damage cells in seconds. Particulate from a porous slab contaminates a clean room. Lippage or waviness in the concrete throws off AGV navigation and robotic arm positioning.
Our ESD manufacturing concrete systems are bonded to ground and tested for resistance and decay time, not just labelled anti-static. Our facility flooring work includes the same discipline: grind to profile, pour level, cure fully, verify performance.
Whether you are building a new battery line or retrofitting an existing facility, the slab has to be engineered, not just poured. That is what separates a floor that passes audit from one that passes inspection.
Recent installations
Installation sequence
How We Build Precision Facility Concrete in Boston
Confirm the spec and chemistry
We review the clean-room classification, ESD requirements, production chemistry, flatness tolerance and AGV or robotic specifications to engineer the right concrete system.
Prepare the slab substrate
We grind or shot-blast the existing concrete to a clean profile, test for moisture, repair cracks or voids, and pour self-leveling concrete where the slab is out of tolerance.
Install the system to spec
We apply the ESD bonding, grounding straps and topcoat system, including coved base and seamless detailing where the clean-room protocol requires it.
Test and certify
The concrete cures fully, ESD performance is tested and documented, flatness is laser-verified, and the floor is handed back ready for your process to begin.
Built to be audited
Grounded & Tested Concrete for Battery and Tech Facilities
A floor that looks clean is not the same as a floor that is clean. A concrete slab that is labelled ESD is not the same as one that is grounded and tested. We build facility concrete to be verified, not just assumed.
Our manufacturing facility concrete includes grounding bonded to a real electrical ground, tested for resistance and decay time per the spec. Our warehouse and production flooring is laser-levelled and cured under controlled conditions so the slab stays flat under load. Both are documented and handed to you with test results, not just a completion date.
When your facility is audited, the floor passes because it was built to pass, not because it was promised to pass.
ESD grounding, clean-room standards, flatness and controlled-environment concrete in Boston.
ESD flooring is a grounded, anti-static floor system that dissipates static. EV battery and electronics production need it because a static discharge from a normal floor can damage cells, components or trigger an event.
Yes. Clean room concrete floors are flat, seamless and coved, with the chemistry, particulate control and detailing the protocol requires, installed so the room can actually be certified.
It has to do three things at once, ground the floor electrically, resist the production chemistry, and hold a flatness tolerance so AGVs and robotics run true. A standard industrial floor does not deliver any of those by default.
Yes, where the spec requires it. The grounding is tied to a real ground and tested for the resistance and decay-time numbers in the spec, not just installed and assumed.
Yes. We phase the work around the production schedule, isolate the area, grind back to a clean profile and install the system zone by zone, so the operation keeps moving while the floor gets built right.
Client feedback
What Boston Battery & Tech Facilities Say About Their Precision Concrete
ESD floor system through the assembly cells, grounded and tested. We have not had a static event in a year and our particulate counts are inside spec every audit.
H. K.
Battery production lead
★★★★★
Coved, seamless and dead flat. The clean-room protocol actually works because the floor was built to be cleaned, not just labelled clean-room.
B. A.
Clean-room operations
★★★★★
Phased it cell by cell so production never stopped. The new floor is flat enough that our AGVs run a measurable amount faster and quieter.
S. M.
Technology facility manager
★★★★★
They asked the right questions about chemistry, flatness and grounding before they quoted. That alone separated them from the contractors who just sell coating.
T. P.
EV manufacturing engineer
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Boston.
Share the clean-room or ESD spec, the production chemistry, flatness tolerance and your timeline, and we will engineer the concrete system and send a written, itemised quote within one business day.
