Your placement crew, our pump and operator. Boston Concrete puts a line or boom pump on your job for the specific pour you have scheduled, billed from arrival through clean-out. No full-service contract required. Every booking opens with a free assessment and a written quote.
Think of it as splitting the job in two. Our side: the pump truck, the operator, and the line or boom positioned to your placement zone. Your side: the crew at the discharge end, managing the concrete as it comes off the hose. That division suits contractors who run their own placement on slab pours, foundation walls, or elevated decks but hit a site where chute discharge simply will not reach.
We select the pump type before the booking is confirmed. A tight residential lot in Somerville with a backyard slab pour typically calls for a line pump; a second-storey deck pour in Cambridge or a high-wall foundation in Quincy may need a boom. Getting that call right at the assessment stage keeps the pour moving and the billing clean.
Hourly billing starts at truck arrival and closes after clean-out. There is no charge for time the pump is not running. For projects where you also need the concrete supply, see our ready-mix concrete supply page. For a look at how we price pumping jobs generally, the concrete cost guide has a pumping section. Questions about which pump fits your slab? The concrete FAQs cover common pump-selection questions, and the concrete pumping overview lays out all three service formats.
Recent work
How it works
From First Call to Pour Day: Booking a Concrete Pump Rental in Boston
Tell us the pour details
Pour location, placement zone dimensions, estimated concrete volume, and any site constraints (overhead clearance, access width, neighboring structures). A phone call or a sketch is usually enough to get started.
We select the right pump
Based on what you describe, we confirm whether a line pump or boom pump fits the job. That decision drives the hourly rate, so it gets settled before the written quote goes out, not after the truck arrives.
Written quote and booking
The quote spells out the hourly rate, setup fee, and minimum charge. Once you confirm, the pump and operator are locked to your pour date. Ready-mix timing can be coordinated through us or managed on your end.
Pour day: truck arrives, pump runs, crew places
The pump truck positions at the spot your crew identifies. Line or boom is set to the placement zone. Pumping starts when the concrete truck is ready. Your crew handles the discharge end. After the pour, the line is cleaned out and the truck departs. Billing reflects actual hours on site.
Why contractors rent
When Concrete Pump Rental Makes More Sense Than Full Service
A contractor running a tight slab schedule across multiple Boston-area sites does not need someone else managing the pour. What they need is a pump on the lot at 7 a.m., positioned correctly, and running at the pace their finishers can handle. Hourly rental delivers exactly that. The placement crew stays in charge of the concrete; the pump operator handles the equipment. No overlap, no friction.
The math also works differently from full-service pumping. Contractors who pour concrete regularly but only occasionally hit access problems, a narrow Brookline side yard, a Waltham basement with no chute clearance, a Quincy foundation wall set back from the street, find that renting pump capacity for those specific pours costs far less than owning equipment that sits idle the rest of the season.
If your scope grows and you need full pour management on a future job, our boom pump service and line pump service cover that. For industrial slab work where the floor coating comes after the pour, see our warehouse floor coating page. And if you are weighing volumetric versus standard ready-mix for the pour itself, the specialty ready-mix page has the comparison.
Hourly rates, line vs. boom, minimum charges, and what your crew needs to know before pour day.
Pump plus operator. We do not rent unoperated pumps; the operator is part of the service and ensures the pump runs safely and efficiently during your pour. Your crew handles the placement end of the line.
Hourly rate with a setup fee and minimum charge. Rate depends on whether line or boom pump is dispatched. The quote at booking confirms all the numbers; there are no surprises at billing time.
Yes. The assessment is free, the quote is in writing, and you book or not based on what works for your project. No commitment until you confirm.
Yes if helpful, or you can manage the ready-mix coordination yourself. Many contractors prefer to manage their own supplier relationship; we just dispatch the pump for the agreed time.
As far ahead as you can, especially in busy season. We try to fit short-notice requests when capacity allows; booking ahead guarantees the dispatch.
Rented their line pump for a backyard slab where my chute did not reach. Hourly billing, operator was great, pour went smoothly. Way cheaper than buying my own pump for occasional use.
Z. O5
Slab Contractor, Boston
★★★★★
Boom pump rental for a second-storey pour on a custom home. Operator coordinated with my crew, pumped at our placement rate, clean-out was professional. Will book again.
Y. O5
Foundation Crew Lead, Cambridge
★★★★★
They were honest that line pump was the right tool when I asked about boom. Saved real money on my pour with no quality compromise. Right spec mattered.
Q. O5
Independent Contractor, Somerville
★★★★★
Hourly billing was clean, no padding for time not used. Operator showed up on time, set up fast, no delays. The kind of service that makes me call back.
X. O5
Small Builder, Quincy
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Boston.
Get a Written Pump Rental Quote for Your Boston Pour
Share the pour location, the date, and the placement zone, and we will confirm the right pump, put the rate in writing, and hold the slot for your crew.
